Cibies Question

[timp]

To all who have mounted their Cibies, Whats the best method to remove the chrome bezel once they are in place. I see from the photos on Ryan's beast his have been mounted to make it easier, however, I have mounted mine with the spring on the bottom.

I used the method John posted a while back. It worked a dream and was incredibly easy. Thanks John.

Will Post some photos soon.

[CamBiscuit]

Hi Tim

Just pull the little tab on the bottom.

[CamBiscuit]

Also I think you can rotate the mounting ring on the body one notch so that the tab is offset to the side like Ryans and mine to make access easier.

Cheers!

[timp]

Thanks Cam. One of those tabs is broken, and there is a slot to stick something in the hole. I'm a bit nervous yanking on the other one now!

Sounds like rotating them is the answer.

[Fishcop]

For the life of me, I couldn't work out how to rotate the bezel correctly to get the offset for the ring tab... I settled for a little 3M clear vinyl where the tabs touch.

Garage is coming along great and I'm getting ready to tackle a few neglected tasks such as actually wiring up my Cibies and refinishing my Fuchs in RSR finish (I'll do a write up of that when I start )

Glad my photos/instructions were of use!