Tank Filter

[PCM911T]

Quote:
Originally Posted by PCM911T
Is there filter in the bottom of the tank?

Inline filter in the base of the tank.........

I've got the Red Kote liner in my tank......6000 Miles and no indication of failure.... Just another option to the Por stuff.......now back to the OP
__________________
Tony Campbell

Thanks Tony, is the filter cleanable or should I order a new one, along with the necessary gaskets/washers?

Paul M

[Terminator]

Just order a new, one not that expensive

[Classic]

http://www.sierramadrecollection.com/911-912-65-73-/Engine-Fuel-Systems/911-Fuel-Carburetor/Fuel-Tank-Fitting-with-Strainer-911-69-73-p16768.html

It should be the 8mm

[Fishcop]

Paul, are you asking whether the POR15 or Redkote affect the filter? If so, definitely! But you remove it and the drain bung as part of the process. I went to Clarke Rubber and bought various sized rubber boat bungs and plugged the holes during the resto. Worked really well.

You can clean the filter mesh using an organic solvent (carby cleaner) and a fine wire brush, or as suggested, replace with a new one. You will need a standard (22mm I think) crushable alloy washer when you replace/remove the filter.

[PCM911T]

Great info, thanks to all.

Cheers

Paul M