911 2.4S spec with 7R case short engine - DEPOSIT TAKEN
Bare long engine with cooling tin ware, distributor and leads, oil cooler and matched Weber inlet manifolds
Photo's are available on request.
Contact Vaughan Stibbard 0412 975 932 or email vstibbard@2dudes.net.au
Bare long engine with cooling tin ware, distributor and leads, oil cooler and matched Weber inlet manifolds
- No fan, alternator, exhaust or flywheel
- Built as 2.4S spec engine, with 2.4 S camshafts, 2.2 S pistons (raises compression), oil pressure fed chain tensioners
- R case Type 911/46 Engine # 6159028. This case was originally supplied by Porsche in a 1975 2.7 Sporto.
- The 7R case is latest specification with additional ribbing behind flywheel etc, and is in very good condition with no pitting
- Dyno'd at 180 bhp at flywheel
- Minor oil weeping at case join
- ~ 30,000KMs use
- Leak down report; 1=2% 2=3% 3=3% 4=3% 5=4% 6=3%
- Oil pressure @ 170 deg: @ idle 15 psi; @ revs 90 psi
Photo's are available on request.
Contact Vaughan Stibbard 0412 975 932 or email vstibbard@2dudes.net.au
Comment